Spector is a guitar and bass brand started by Stuart Spector in 1974 in New York.
Shortly after its inception, Vinnie Fodera, who later founded Fodera Guitars, also worked in Spector's workshop.
The brand's NS model became explosively popular worldwide, which was created together with Ned Steinberger.
This model is a modern model based on the NS design, but updated because it is modern.
The body is made of alder back and beautiful maple top.
The fingerboard is rosewood, and the neck is made of maple, and it's a 3-piece laminated neck.
The scale is 35 inches.
The pickups are EMG 40TW.
Each of them can be individually coil-tapped by pulling up the volume knob.
As you can see, the design is quite different from Fender, but the 3-dimensional curved body fits the body superbly and has perfect balance both when standing and sitting.
When you actually hold it, you can see that it is a very neatly balanced bass.
The string vibration system is well controlled and very playable.
A light touch quickly produces rich overtones.
The sound is clearly pronounced and clear, yet has an elegant flavor and a strong sense of sound pressure.
This is an excellent point typical of the brand and of very high quality.
The remaining frets are approximately 80%.
The truss rod is fully tight.
The neck is currently straight. The string height is 2.5mm on the 1st string side and 3.3mm on the 5th string side at the 12th fret.
The body and paintwork are in good condition, with a few small dents on the sides of the body. There are some buckle marks on the back of the body that are not easily noticeable.
The electrical system is in good condition.
No obvious modifications were found.
Controls : Neck volume - push/pull (coil tap on/off), Rear volume - push/pull (coil tap on/off), Treble, Bass
Nut width : 46.0mm
Pitch between strings at bridge : 18.0mm
Year of manufacture : unknown
Country of manufacture : CZECH REPUBLIC
Accessories : Original gig bag
GIB craftsmen will adjust the strings to make them easier to play before delivery.
serial number : #NB12128
Weight : 4.56kg
Fret: 80% remaining
Truss rod: tight
The string height is 2.5mm on the 1st string side and 3.3mm on the 5th string above the 12th fret, so it The string height is 2.5mm on the 1st string side and 3.3mm on the 5th string above the 12th fret, so it can be played without clogging or buzzing.
control：Neck volume - push/pull (coil tap ON/OFF), rear volume - push/pull (coil tap ON/OFF), treble, bass
body condition: There are some small dents on the side of the body. There are some hard to see buckle marks on the back of the body.
electrical：Good.
nut width：46.0mm
string spacing：18.0mm
custom：none
accessories：original gig bag
year：manufacturing date unknown
country of origin：CZECH REPUBLIC
text: Shunsuke Saga
Inspection by : WAKATSUKI
GIB with 3-month warranty
We ship in a sturdy cardboard box.
We can also ship to overseas destinations.
item will be packed with a hard cardboard box.
We do ship internationally.
Contact Info
Contact Info
LINE : vwj2699r
email : info@bassick.jp
tel : 045 534 7133
Shortly after its inception, Vinnie Fodera, who later founded Fodera Guitars, also worked in Spector's workshop.
The brand's NS model became explosively popular worldwide, which was created together with Ned Steinberger.
This model is a modern model based on the NS design, but updated because it is modern.
The body is made of alder back and beautiful maple top.
The fingerboard is rosewood, and the neck is made of maple, and it's a 3-piece laminated neck.
The scale is 35 inches.
The pickups are EMG 40TW.
Each of them can be individually coil-tapped by pulling up the volume knob.
As you can see, the design is quite different from Fender, but the 3-dimensional curved body fits the body superbly and has perfect balance both when standing and sitting.
When you actually hold it, you can see that it is a very neatly balanced bass.
The string vibration system is well controlled and very playable.
A light touch quickly produces rich overtones.
The sound is clearly pronounced and clear, yet has an elegant flavor and a strong sense of sound pressure.
This is an excellent point typical of the brand and of very high quality.
The remaining frets are approximately 80%.
The truss rod is fully tight.
The neck is currently straight. The string height is 2.5mm on the 1st string side and 3.3mm on the 5th string side at the 12th fret.
The body and paintwork are in good condition, with a few small dents on the sides of the body. There are some buckle marks on the back of the body that are not easily noticeable.
The electrical system is in good condition.
No obvious modifications were found.
Controls : Neck volume - push/pull (coil tap on/off), Rear volume - push/pull (coil tap on/off), Treble, Bass
Nut width : 46.0mm
Pitch between strings at bridge : 18.0mm
Year of manufacture : unknown
Country of manufacture : CZECH REPUBLIC
Accessories : Original gig bag
GIB craftsmen will adjust the strings to make them easier to play before delivery.
serial number : #NB12128
Weight : 4.56kg
Fret: 80% remaining
Truss rod: tight
The string height is 2.5mm on the 1st string side and 3.3mm on the 5th string above the 12th fret, so it The string height is 2.5mm on the 1st string side and 3.3mm on the 5th string above the 12th fret, so it can be played without clogging or buzzing.
control：Neck volume - push/pull (coil tap ON/OFF), rear volume - push/pull (coil tap ON/OFF), treble, bass
body condition: There are some small dents on the side of the body. There are some hard to see buckle marks on the back of the body.
electrical：Good.
nut width：46.0mm
string spacing：18.0mm
custom：none
accessories：original gig bag
year：manufacturing date unknown
country of origin：CZECH REPUBLIC
text: Shunsuke Saga
Inspection by : WAKATSUKI
GIB with 3-month warranty
We ship in a sturdy cardboard box.
We can also ship to overseas destinations.
item will be packed with a hard cardboard box.
We do ship internationally.
Contact Info
Contact Info
LINE : vwj2699r
email : info@bassick.jp
tel : 045 534 7133