Bacchus is a Japanese brand based in Nagano, Japan.
Bacchus is a brand under the umbrella of Divisor, which owns a large guitar factory called Asuka Factory, and is highly regarded by many musicians for the high quality of its guitars because they are made by the factory itself.
This model is the WL model, which is a lineage of the top-of-the-line WOODLINE model.
The main feature of this model is the roasted maple used for the neck and fingerboard.
This is also called thermo wood.
Thermo wood was originally used in Finland as a building material for saunas, and was put to practical use in the field of musical instruments by the Japanese company Sago.
Thermowood is a wood that can withstand high temperatures and humidity, and its usefulness as a wood for musical instruments is evident in the fact that leading manufacturers such as Sadowsky and Suhr have adopted it.
It is said that a certain amount of thermowood is disposed of due to its processing.
Probably, some that will warp in the future will be played here.
Ash is used for the body, and the beautiful grain of the wood can be enjoyed to the fullest.
This appearance is unique to ash and cannot be obtained elsewhere.
TUSQ is used for the nut.
The cost has been well spent on these important points.
The high potential as an instrument is superb.
From the low price range to the high price range, Bacchus actively adopts roasted maple.
Please try this one and feel the full potential of this wonderful wood.
The neck and fingerboard of this unit have a faint flame.
We recommend it in that sense as well.
There is almost no fret wear.
The truss rod is in good working order and the neck is in good condition.
There are a few minor scratches on the head.
The grips were originally painted matte, but there are some areas that have been played in and have a glossy finish.
The body and painted surfaces are in good condition with a few scratches.
The electrical system is in good condition.
The Bacchus optional jack replacement/wire replacement offered by GIB has been performed.
Jacks have been upgraded to Switchcraft and wiring material to Belden.
Controls : Neck volume, bridge volume, master tone - push/pull (parallel/series)
Nut width : 44.7mm
Pitch between strings at bridge : 17.5mm
Year of manufacture : unknown
Country of manufacture : INDONESIA
Accessories : Original soft case
SPEC
Body : Ash
Neck：Roasted Maple
Fingerboard：Roasted Maple
Nut：graph tech tusq XL
Bridge：JB bridge w/ brass saddle
Machineheads: Opengear
Fret: Nickel Silver
Pickup: Original JB set
Control: 2Vol, 1Tone (Pull-up = turbo switch)
Scale: 34inch
Width at Nut：46.0mm
Finish：Urethane
String：D'Addario 45-130
Accessories：Gig bag, warranty card, wrench
The D'addario EXL, trusted by professional musicians, is used in the setup.
Characterized by a powerful attack and rich overtones, this performance is truly worthy of being called a standard.
Please enjoy these high-quality strings that bring out the performance and character of the instrument to the fullest, so please enjoy them as well.
GIB craftsmen will adjust them to make them easy to play and deliver them to you.
serial number: #GI07141
Weight: 4.705kg
Fret: 90% remaining
Truss rod: good working
The grip is originally a matte paint, but there are places where it is played and glossy . control: Neck volume, bridge volume
control：Neck volume, bridge volume, master tone -push/pull (parallel/series)
body condition：Scratch scratches are scattered.
electrical：Good.
nut width：44.7mm
string spacing：17.5mm
custom: The jack exchange/wire exchange of the BACCHUS option provided by GIB has been enforced. Jack is upgraded to the switch craft, and the wiring material is upgraded to Belden.
accessories：Original soft case
year：manufacturing date unknown
country of origin：Indonesia
Text: Shunsuke Saga
Inspection by : Wakatsuki
GIB 3-month warranty included
Ships in a sturdy cardboard box.
We can also ship to overseas destinations.
Bacchus is a brand under the umbrella of Divisor, which owns a large guitar factory called Asuka Factory, and is highly regarded by many musicians for the high quality of its guitars because they are made by the factory itself.
This model is the WL model, which is a lineage of the top-of-the-line WOODLINE model.
The main feature of this model is the roasted maple used for the neck and fingerboard.
This is also called thermo wood.
Thermo wood was originally used in Finland as a building material for saunas, and was put to practical use in the field of musical instruments by the Japanese company Sago.
Thermowood is a wood that can withstand high temperatures and humidity, and its usefulness as a wood for musical instruments is evident in the fact that leading manufacturers such as Sadowsky and Suhr have adopted it.
It is said that a certain amount of thermowood is disposed of due to its processing.
Probably, some that will warp in the future will be played here.
Ash is used for the body, and the beautiful grain of the wood can be enjoyed to the fullest.
This appearance is unique to ash and cannot be obtained elsewhere.
TUSQ is used for the nut.
The cost has been well spent on these important points.
The high potential as an instrument is superb.
From the low price range to the high price range, Bacchus actively adopts roasted maple.
Please try this one and feel the full potential of this wonderful wood.
The neck and fingerboard of this unit have a faint flame.
We recommend it in that sense as well.
There is almost no fret wear.
The truss rod is in good working order and the neck is in good condition.
There are a few minor scratches on the head.
The grips were originally painted matte, but there are some areas that have been played in and have a glossy finish.
The body and painted surfaces are in good condition with a few scratches.
The electrical system is in good condition.
The Bacchus optional jack replacement/wire replacement offered by GIB has been performed.
Jacks have been upgraded to Switchcraft and wiring material to Belden.
Controls : Neck volume, bridge volume, master tone - push/pull (parallel/series)
Nut width : 44.7mm
Pitch between strings at bridge : 17.5mm
Year of manufacture : unknown
Country of manufacture : INDONESIA
Accessories : Original soft case
SPEC
Body : Ash
Neck：Roasted Maple
Fingerboard：Roasted Maple
Nut：graph tech tusq XL
Bridge：JB bridge w/ brass saddle
Machineheads: Opengear
Fret: Nickel Silver
Pickup: Original JB set
Control: 2Vol, 1Tone (Pull-up = turbo switch)
Scale: 34inch
Width at Nut：46.0mm
Finish：Urethane
String：D'Addario 45-130
Accessories：Gig bag, warranty card, wrench
The D'addario EXL, trusted by professional musicians, is used in the setup.
Characterized by a powerful attack and rich overtones, this performance is truly worthy of being called a standard.
Please enjoy these high-quality strings that bring out the performance and character of the instrument to the fullest, so please enjoy them as well.
GIB craftsmen will adjust them to make them easy to play and deliver them to you.
serial number: #GI07141
Weight: 4.705kg
Fret: 90% remaining
Truss rod: good working
The grip is originally a matte paint, but there are places where it is played and glossy . control: Neck volume, bridge volume
control：Neck volume, bridge volume, master tone -push/pull (parallel/series)
body condition：Scratch scratches are scattered.
electrical：Good.
nut width：44.7mm
string spacing：17.5mm
custom: The jack exchange/wire exchange of the BACCHUS option provided by GIB has been enforced. Jack is upgraded to the switch craft, and the wiring material is upgraded to Belden.
accessories：Original soft case
year：manufacturing date unknown
country of origin：Indonesia
Text: Shunsuke Saga
Inspection by : Wakatsuki
GIB 3-month warranty included
Ships in a sturdy cardboard box.
We can also ship to overseas destinations.