MOON is a long-established guitar brand representing Japan.
It is highly regarded by many professional artists, and Mitsuru Sudo and Larry Graham are known to be patrons of the brand.
This JJ model with slanted front PU is highly regarded as a flagship model.
The color is a little unusual.
This sound with sharp sharpness and rich low frequency when slapping and finger playing is worth mentioning.
This sound is the reason why it has been loved by bassists for a long time.
The PU may look a little strange, but I think it is the SCHECTER MONSTER TONE of the time.
The remaining frets are about 70%.
The truss rod is a little stiff, but we have confirmed that it works about 90 degrees.
The neck is in good condition.
The body and paintwork are in player's condition with a few scratches, dings, and dull parts.
The wiring was modified a bit messily, so it has been slightly reworked to GIB.
As a result, the tone pot has been replaced with a CTS one.
Controls : Volume, Volume, Tone, PU selector
Nut width : 39.3mm
Pitch between strings at bridge : 19mm
Year of manufacture : unknown
Country of manufacture : JAPAN
Accessories : soft case
Stringjoy, imported and sold by our store, is used in the setup.
Made in Nashville, the Stringjoy has a silky feel with plenty of low end and rich, natural overtones.
These are quality strings that bring out the best performance and character of the instrument, so please enjoy them as well.
GIB's craftsmen will adjust the strings to make them easy to play and deliver them to you.
serial number: #13387
Weight: 5.055kg
Fret: 70% remaining
Truss rod: tight a little, but can work roughly 90° at least
neck condition: Good.
control：Volume, volume, tone, PU selector (remodeled with GIB)
body condition：This is a players condition where scratches, dents, and dullness of parts are scattered.
nut width：39.3mm
string spacing：19mm
custom: Since the electrical system was modestly modified, the tone pot was replaced with a CTS by Gib. In addition, there is a broken circuit, so we have re-wiring.
Since the PU selector was attached from the beginning, we use it as it is. The contents of the current electric system are as described above.
For PU, it is unknown because there is no cover and there is no engraving.
accessories
It is highly regarded by many professional artists, and Mitsuru Sudo and Larry Graham are known to be patrons of the brand.
This JJ model with slanted front PU is highly regarded as a flagship model.
The color is a little unusual.
This sound with sharp sharpness and rich low frequency when slapping and finger playing is worth mentioning.
This sound is the reason why it has been loved by bassists for a long time.
The PU may look a little strange, but I think it is the SCHECTER MONSTER TONE of the time.
The remaining frets are about 70%.
The truss rod is a little stiff, but we have confirmed that it works about 90 degrees.
The neck is in good condition.
The body and paintwork are in player's condition with a few scratches, dings, and dull parts.
The wiring was modified a bit messily, so it has been slightly reworked to GIB.
As a result, the tone pot has been replaced with a CTS one.
Controls : Volume, Volume, Tone, PU selector
Nut width : 39.3mm
Pitch between strings at bridge : 19mm
Year of manufacture : unknown
Country of manufacture : JAPAN
Accessories : soft case
Stringjoy, imported and sold by our store, is used in the setup.
Made in Nashville, the Stringjoy has a silky feel with plenty of low end and rich, natural overtones.
These are quality strings that bring out the best performance and character of the instrument, so please enjoy them as well.
GIB's craftsmen will adjust the strings to make them easy to play and deliver them to you.
serial number: #13387
Weight: 5.055kg
Fret: 70% remaining
Truss rod: tight a little, but can work roughly 90° at least
neck condition: Good.
control：Volume, volume, tone, PU selector (remodeled with GIB)
body condition：This is a players condition where scratches, dents, and dullness of parts are scattered.
nut width：39.3mm
string spacing：19mm
custom: Since the electrical system was modestly modified, the tone pot was replaced with a CTS by Gib. In addition, there is a broken circuit, so we have re-wiring.
Since the PU selector was attached from the beginning, we use it as it is. The contents of the current electric system are as described above.
For PU, it is unknown because there is no cover and there is no engraving.
accessories