History is an original brand by Shimamura Gakki.
As an original brand of a music store, it is characterized by high cost performance.
This model is based on the classic jazz bass.
Ash is used for the body and rosewood for the fingerboard.
It is a classic Fender-like configuration.
The neck made of maple is reinforced by KTS titanium reinforcement.
The frets are fretted by the well-known CFS (circle fretting system).
CFS is a fan-shaped fretting system, which makes the frets strike at right angles to the strings and allows for more accurate scale setting.
The original pickups are used.
The bridge pickup is mounted in a position closer to the bridge than usual, aiming for a Fender-like nuance in the 1970s.
An Aguilar OBP-2 preamp is used.
It supports high-quality sound and aggressive tone production.
The fact that a passive tone is installed is also a good point.
The scale is 34 inches.
The sound is tight and has the nuance of a 1970s JB.
The density of the lower register and the strength of the upper register are characteristic of this instrument, and modern bassists in particular will have a positive impression of it.
The playing is smooth and the low B's have a nice feel to them.
It is well made.
The frets are roughly 80% remaining.
The truss rod is working and the neck is in good condition.
There is a visible 5mm wood ding on the head top near the logo.
The body and paintwork are in good condition with a few visible wood dings and scratches.
The electrical system is in good condition.
No obvious modifications were found.
Controls : Neck volume, bridge volume, treble, bass, passive tone - push/pull (active/passive)
Nut width : 48.0mm
Pitch between strings at bridge : 18.0mm
Year of manufacture : 2013
Country of manufacture : Japan
Accessories : None
D'addario EXL, which is trusted by professional musicians, is used in the setup.
Characterized by a powerful attack and rich overtones, this performance is truly worthy of being called a standard.
Please enjoy these high-quality strings that bring out the performance and character of the instrument to the fullest, so please enjoy them as well.
GIB craftsmen will adjust them to make them easy to play and deliver them to you.
serial number: #L130663
Weight: 4.505kg
Fret: 80% remaining
Truss rod: good working
neck condition: Good. There is a visible dent in the wood about 5mm near the logo on the top of the head.
Controls: Neck volume, bridge volume, treble, bass, passive tone - push/pull (active/passive)
body condition: There are several visible dents in the wood. There are some scratches here and there.
electrical：Good.
nut width：48.0mm
string spacing：18.0mm
custom：none
accessories：none
year：2013
country of origin：Japan
text: Shunsuke Saga
Inspection by : WAKATSUKI
GIB 3 months warranty
Ships in a sturdy cardboard box.
We can also ship to overseas.
item will be packed with a hard cardboard box.
We do ship internationally.
Contact Info
Contact Info
LINE : vwj2699r
email : info@bassick.jp
tel : 045 534 7133
Translated with www.DeepL.com/Translator (free version)adpiece has been shaved off.
Please understand that we cannot say for sure whether it is original fretless or not, as it is difficult to judge.
The preamp is stamped HAZ.
It may seem more inorganic than a bass made of wood, but it has a strange organic flavor.
The sound image that is never blurred even though it creates an unusual low frequency is a unique characteristic.
The neck is slightly forward warped.
Currently, the string height on the 12th fret is 2.0mm on the 1st string side and 2.5mm on the 4th string side, and it can be played without any sound jamming or chattering.
The condition of the body and painted surface shows some scratches and dullness.
There are no noticeable dents.
The electrical system is in good condition, with a buzzing noise when the balancer is turned.
Otherwise, it is in good condition.
Finger lamps have been retrofitted.
Pickups have been replaced with recent EMG HB.
Controls : Master volume, balancer, treble/bass
Nut width : 36.8mm
Pitch between strings at bridge : 17.0mm
Year of manufacture : 1990s
Country of manufacture : USA
Accessories : Hard Case
This is a consignment item, so shipping costs may differ from normal.
GIB craftsmen will adjust it to make it easier to play.
serial number : #T 8491
Weight: 3.790kg
Currently, the string height above the 12th fret is 2.0mm on the 1st string side and 2.5mm on the 4th string side, and it can be played without any jam. Currently the string height above the 12th fret is 2.0mm on the 1st string side and 2.5mm on the 4th string side, and it can be played without any jamming or buzzing.
Controls: Master volume, balancer, treble/bass
body condition: There are scratches and dullness here and there.
Others are in good condition.
nut width：36.8mm
string spacing: 17.0mm
custom: A finger lamp is retrofitted. The pickup has been replaced with a recent EMG HB. When it arrived, it had a metal fret line and 0 fret, but since the fingerboard was thin and the fret line was sticking out, GIB applied an epoxy coating to the top surface while leaving the fret line as it is. Due to the coating, the 0 fret has been removed and a new nut has been installed. Due to this, part of the headpiece has been shaved off.
accessories：hard case
year：1990s
country of origin：USA
Text: Shunsuke Saga
Inspection by : Wakatsuki
GIB 3 months warranty
Ships in a sturdy cardboard box.
We can also ship to international destinations.
Contact Info
LINE : vwj2699r
email : info@bassick.jp
tel : 045 534 7133
As an original brand of a music store, it is characterized by high cost performance.
This model is based on the classic jazz bass.
Ash is used for the body and rosewood for the fingerboard.
It is a classic Fender-like configuration.
The neck made of maple is reinforced by KTS titanium reinforcement.
The frets are fretted by the well-known CFS (circle fretting system).
CFS is a fan-shaped fretting system, which makes the frets strike at right angles to the strings and allows for more accurate scale setting.
The original pickups are used.
The bridge pickup is mounted in a position closer to the bridge than usual, aiming for a Fender-like nuance in the 1970s.
An Aguilar OBP-2 preamp is used.
It supports high-quality sound and aggressive tone production.
The fact that a passive tone is installed is also a good point.
The scale is 34 inches.
The sound is tight and has the nuance of a 1970s JB.
The density of the lower register and the strength of the upper register are characteristic of this instrument, and modern bassists in particular will have a positive impression of it.
The playing is smooth and the low B's have a nice feel to them.
It is well made.
The frets are roughly 80% remaining.
The truss rod is working and the neck is in good condition.
There is a visible 5mm wood ding on the head top near the logo.
The body and paintwork are in good condition with a few visible wood dings and scratches.
The electrical system is in good condition.
No obvious modifications were found.
Controls : Neck volume, bridge volume, treble, bass, passive tone - push/pull (active/passive)
Nut width : 48.0mm
Pitch between strings at bridge : 18.0mm
Year of manufacture : 2013
Country of manufacture : Japan
Accessories : None
D'addario EXL, which is trusted by professional musicians, is used in the setup.
Characterized by a powerful attack and rich overtones, this performance is truly worthy of being called a standard.
Please enjoy these high-quality strings that bring out the performance and character of the instrument to the fullest, so please enjoy them as well.
GIB craftsmen will adjust them to make them easy to play and deliver them to you.
serial number: #L130663
Weight: 4.505kg
Fret: 80% remaining
Truss rod: good working
neck condition: Good. There is a visible dent in the wood about 5mm near the logo on the top of the head.
Controls: Neck volume, bridge volume, treble, bass, passive tone - push/pull (active/passive)
body condition: There are several visible dents in the wood. There are some scratches here and there.
electrical：Good.
nut width：48.0mm
string spacing：18.0mm
custom：none
accessories：none
year：2013
country of origin：Japan
text: Shunsuke Saga
Inspection by : WAKATSUKI
GIB 3 months warranty
Ships in a sturdy cardboard box.
We can also ship to overseas.
item will be packed with a hard cardboard box.
We do ship internationally.
Contact Info
Contact Info
LINE : vwj2699r
email : info@bassick.jp
tel : 045 534 7133
Translated with www.DeepL.com/Translator (free version)adpiece has been shaved off.
Please understand that we cannot say for sure whether it is original fretless or not, as it is difficult to judge.
The preamp is stamped HAZ.
It may seem more inorganic than a bass made of wood, but it has a strange organic flavor.
The sound image that is never blurred even though it creates an unusual low frequency is a unique characteristic.
The neck is slightly forward warped.
Currently, the string height on the 12th fret is 2.0mm on the 1st string side and 2.5mm on the 4th string side, and it can be played without any sound jamming or chattering.
The condition of the body and painted surface shows some scratches and dullness.
There are no noticeable dents.
The electrical system is in good condition, with a buzzing noise when the balancer is turned.
Otherwise, it is in good condition.
Finger lamps have been retrofitted.
Pickups have been replaced with recent EMG HB.
Controls : Master volume, balancer, treble/bass
Nut width : 36.8mm
Pitch between strings at bridge : 17.0mm
Year of manufacture : 1990s
Country of manufacture : USA
Accessories : Hard Case
This is a consignment item, so shipping costs may differ from normal.
GIB craftsmen will adjust it to make it easier to play.
serial number : #T 8491
Weight: 3.790kg
Currently, the string height above the 12th fret is 2.0mm on the 1st string side and 2.5mm on the 4th string side, and it can be played without any jam. Currently the string height above the 12th fret is 2.0mm on the 1st string side and 2.5mm on the 4th string side, and it can be played without any jamming or buzzing.
Controls: Master volume, balancer, treble/bass
body condition: There are scratches and dullness here and there.
Others are in good condition.
nut width：36.8mm
string spacing: 17.0mm
custom: A finger lamp is retrofitted. The pickup has been replaced with a recent EMG HB. When it arrived, it had a metal fret line and 0 fret, but since the fingerboard was thin and the fret line was sticking out, GIB applied an epoxy coating to the top surface while leaving the fret line as it is. Due to the coating, the 0 fret has been removed and a new nut has been installed. Due to this, part of the headpiece has been shaved off.
accessories：hard case
year：1990s
country of origin：USA
Text: Shunsuke Saga
Inspection by : Wakatsuki
GIB 3 months warranty
Ships in a sturdy cardboard box.
We can also ship to international destinations.
Contact Info
LINE : vwj2699r
email : info@bassick.jp
tel : 045 534 7133