Gibson is the king of the guitar world, having created many famous instruments.
Guitars are especially popular, but basses with unique looks and rock sound are also very popular.
This is a Triumph Bass manufactured in 1978.
As you can see, it has an LP shape.
The body and neck are Mahogany, and the fingerboard is Rosewood, a wood composition typical of Gibson.
It is equipped with a very distinctive low-impedance PU.
This is an attempt to reduce signal degradation even when running long cables.
Although passive, the multifunctional circuit supports flexible sound creation.
The remaining frets are approximately 60%.
The truss rod is a little stiff, but we have confirmed that it works at about 90 degrees.
The neck is in high condition. Due to the structure of the bridge, fine string height adjustment is not possible.
The condition of the body and painted surface is commensurate with its age, with scattered dents, scratches, and stains throughout. There are marks where the strap pins have been relocated. There is a chip on the control panel where the screw is fixed.
The electrical system is in good condition.
Controls : Master volume, PU select toggle switch (front, center, rear), tone, bass, PU phase control switch (IN, OUT), impedance select switch (HI, LO), tone select switch (HIGH, NORM, DEEP BASS)
Nut width : 38.7mm
Pitch between strings at bridge : 17mm
Scale : 30inch
Year of manufacture : 1978
Country of manufacture : USA
Accessories : Hard case
Pitbull Strings, which we import and sell, is used for setup.
These high quality strings have a natural sound and bring out the best performance and character of the instrument, so please enjoy them as well.
GIB's craftsmen adjust the strings to make them easy to play and deliver them to you.
serial number: #730480
Weight: 5.156kg
Fret: 60% remaining
Truss rod: tight a little, but can work roughly 90° at least
neck condition: You can see Due to the structure of the bridge, fine string height adjustments cannot be made, so you can play without any problems by adjusting the 1st string 3.5.5 adjusting the 1st string 3.5mm, 2nd string 3.3mm, 3rd string 3.4mm, and 4th string 4.0mm.
control：Master volume, PU select toggle switch (front, center, rear), tone, bass, PU phase control switch (IN, OUT), impedance select switch (HI, LO), tone select switch (HIGH, NORM, DEEP BASS)
body condition: There are There are traces of the strap pin being relocated. There is a chip in the screw fixing part of the control panel.
electrical: Good
nut width: 38.7mm
string spacing: 17mm
scale length: 30inch
custom: none accessories：hard case
year：1978
country of origin：USA
text：Shusuke Saga
inspector : Sumita