Fender is the undisputed number one brand of electric guitars and basses.
It is loved by countless top artists such as Jaco Pastorius, Marcus Miller, and Geddy Lee.
The Jazz Bass was released with the positioning of a higher-end model of Precision Bass.
Its sharp and clear sound has been loved by many bassists, and even today it enjoys overwhelming support and a shining presence.
This model is a Fender Japan brand JB62 FL, which was highly regarded but has disappeared.
There is also a JBD-62 FL as an engraving, so this may be the exact model number.
The front is fat and the rear sings.
Mixing them together in the mixed position produces a tight, clear low end with a distinctive sound.
The truss rod is in good working order.
The neck is in good condition, with the string height at the 12th fret being 3.0mm on the 1st string side and 3.5mm on the 4th string side, which is playable without any chattering or clogging.
There are some small dents on the head, paint cracking and lifting near the 4th string bushing, and a 9mm chip in the wood near the 1st string bushing.
The condition of the body and paint surface is generally scratchy. There are also numerous minor dents and several large dents of around 10 mm. There is one crack in the paint near the neck pocket.
The nut has been replaced, although the material is unknown. The new nut is about 1mm larger than the neck width, so it protrudes about 0.5mm on both sides.
The jack has been replaced with a switch craft. The pickup counterbore, control counterbore, and the back of the pickguard have been sealed with aluminum sheet. This sealing is not of the highest quality and may not be a professional job. If you wish, we can re-seal it for a fee.
Controls : neck volume, bridge volume, master tone
Nut width : 38.7mm
Pitch between strings at bridge : 20.0mm
Year of manufacture : 1984~1987
Country of manufacture : JAPAN
Accessories : Hard Case
This is a consignment item, so shipping costs may differ from normal.
GIB craftsmen will adjust it to make it easier to play.
serial number：#E845669 MADE IN JAPAN
Weight：4.3kg
Fret：% remaining
Truss rod：good working
neck condition：There is a high rise. The string height on the 12th fret is 3.0mm on the 1st string side, 3.5mm on the 4th string side, and can be played without stiffening. A small dent is scattered on the head. There are paint cracks and float near the 4th string bush. There is a 9mm chipping near the first string bush.
control：Neck volume, bridge volume, master tone
body condition：Scratch scratches are seen overall. There are many small dents, and there are several large dents around 10mm. There is one paint crack near the neck pocket.
nut width：38.7mm
string spacing：20.0mm
custom：The material is unknown, but the nut has been replaced. Since the replaced nut is about 1 mm larger than the neck width, there is about 0.5mm protrusion on both sides. Jack has been replaced with a switch craft. Pickup Zaguri, control Zaguri, and shielded on the back of the pickguard with an aluminum seat.
accessories：Hard case
year：1984 ~ 1987
country of origin：Japan
Text : Shunsuke Saga
In charge of inspection : Wakatsuki
GIB 3-month warranty included
item will be packed with a hard cardboard box.
We do ship internationally.
Contact Info
LINE : @vwj2699r
email : info@bassick.jp
tel : 045 534 7133