Bacchus is a Japanese brand based in Nagano, Japan.
Bacchus is a brand under the umbrella of Divisor, which owns a large guitar factory called Asuka Factory, and is highly regarded by many musicians for its high quality because the factory handles its own production.
This model is a WOODLINE model of the Global Series, which is manufactured uniquely for high quality.
The body is made of alder and the fingerboard is rosewood, a classic configuration.
I was surprised at the high quality of the paint.
It looks like MOON and FGN and feels thin.
I could not determine if this is a refinish or not.
The electrical system has been modified and I can feel that it has been handled.
It has a super smooth playing feel and sound like a Bacchus.
It has a smooth response, yet powerful sound.
The remaining frets are approximately 90%.
The truss rod action is a little stiff, but we have confirmed that it works about 90 degrees.
The neck has a reverse warp at the low and high frets, and a forward warp between the 5th and 15th frets. The current string height at the 12th fret is 2.2mm on the 1st string side and 2.7mm on the 4th string side.
The condition of the body and painted surface is as follows: there are numerous dents on the body end, some of which have visible 30mm of wood. There are numerous noticeable scratch marks on the control plate.
The electrical system is in good condition.
The two volume pots have both been replaced with CTS.
Along with the pot replacement, the knobs have been replaced with Fender type knobs.
The pickups have been replaced with crosswire ones, but the model number is unknown.
Control cavity is sealed with conductive paint.
Controls : Neck volume, bridge volume, master tone - push/pull (parallel/series)
Nut width : 37.0mm
Pitch between strings at bridge : 19.0mm
Scale : 34inch
Year of manufacture : unknown
Country of manufacture : INDONESIA
Accessories : Fender soft case
GIB craftsmen will adjust this guitar to make it easy to play before delivery.
serial number : #
Weight : 4.005kg
Fret: 90% remaining
Truss rod: tight a little, but can work roughly 90° at least
Neck condition: There is a reverse warp on the low fret side and high fret side, and a forward warp wave between the 5th and 15th frets. Currently, the string height above the 12th fret is 2.2mm on the 1st string side and 2.7mm on the 4th string side, and it can be played without jamming or buzzing.
control: neck volume, bridge volume, master tone - push/pull (parallel/series)
body condition: There are many dents on the end of the body, some of which show about 30mm of wood. There are many noticeable scratches on the control plate.
electrical：Good.
nut width：37.0mm
string spacing：19.0mm
scale length：34Inch
Along with the pot replacement, the knob has been replaced with a fender type one. The control cavity is shielded with conductive paint.
accessories：fender soft case
year：manufacturing date unknown
country of origin：INDONESIA
Text: Shunsuke Saga
Inspection by : WAKATSUKI
GIB 3-month warranty included
We ship in a sturdy cardboard box.
We can also ship to overseas destinations.
Contact Info
LINE : vwj2699r
email : info@bassick.jp
tel : 045 534 7133