【used】Fender Japan / JB62 Neck - No Brand PB Body Ash 1988-1999(Neck) 4.43kg #H011912 MADE IN JAPAN【GIB Yokohama】

This is a component bass with a Fender Japan neck made by Fujigen.

It uses a jazz bass neck, but the body is a Precision bass.
The shape looks fatter than Fender.

The body material looks like ash.
It is back-threaded, and you can feel that it was carefully made. There is no cheapness.

Pickups are SEYMOUR DUNCAN SBP-2, bridge is BADASS II, joint plate is Freedom Tone Shift Plate SP-JP-03.

Pots are CTS, condenser is Red Dime (SK 1X 50V), and it is still not cheap.

It has a characteristic soft and comfortable playing feel.
The sound is fat like a plebe, with a thick midrange.

The grip is thin because a jazz bass neck is used.

You may feel uncomfortable with its appearance, but you will have a good impression if you play it.

The remaining frets are approximately 70%.
The truss rod is a little stiff, but we have confirmed that it works about 90 degrees.

The neck is in a high position. Currently, the string height on the 12th fret is 2.5mm on the 1st string side and 3.0mm on the 4th string side, and it is playable without any sound clogging or chattering.
On the back of the head, there are four holes for mounting screws, which may have been replaced with other pegs, hidden by the current pegs.
The fingerboard end has been machined to slope like a slap step.

The condition of the body and paint surface shows scattered dings and scratches. There is a crack in the paint near the neck pocket.

The electrical system is in good condition.

Controls : volume, tone
Nut width : 38.5mm
Pitch between strings at bridge: 19.0mm
Year of manufacture : 1988-1999(Neck)
Country of manufacture : unknown
Accessories : Soft case

GIB craftsmen have adjusted this instrument to make it easy to play.

serial number: #H011912 MADE IN JAPAN
Weight: 4.43kg
Fret: 70% remaining
Truss rod: tight a little, but can work roughly 90° at least
At present, the string height on the 12th fret is 2.5mm on the 1st string side, 3.0mm on the 4th string side, and it can be played without sound clogging and stiffness. On the back of the head is a total of 16 vacant holes, which seem to have been replaced with other pegs, four by four so that they are hidden in the 4th string side, and it can be played without sound clogging and stiffness. The fingerboard end is processed with a slap step.
Controls: volume, tone
There is a painted crack near the neck pocket.
electrical：Good.
nut width：38.5mm
string spacing：19.0mm
custom：none
accessories：soft case
year：1988-1999(Neck)
country of origin：unclear

text: Shunsuke Saga

Inspection by : Wakatsuki

GIB 3 months warranty

Ships in a sturdy cardboard box.
We can also ship to overseas destinations.