【used】Darkglass Electronics / Microtubes B7K Ultra v2 Aux IN Limited edition“The SQUID”【GIB Yokohama】

Darkglass is a bass effect and amplifier brand from Finland.

It has gained worldwide popularity in recent years, and many professional bassists at the forefront trust it.

This model is a hugely popular overdrive/preamp.

In addition to a deep, intense distortion sound, it is equipped with a flexible equalizer.

It is the limited edition design ""The SQUID"".

You can choose from three types of Low Mid and High Mid.

Combined with the Grunt switch, which changes the nuances of the low range, and the Attack switch, which changes the strength of the high range, it allows for a wide variety of sound making.

It is an omnidirectional device with cabinet simulation, headphone out, etc.

[Specifications/Terminals]

Master
Microtubes B7K Ultra V2 with Aux-In Adjusts the overall volume. Ideal for fine-tuning the output of the clean mode. Can also be used as a D.I. out level control.

Blend
Controls the mix balance of the clean signal and the overdrive signal. Regardless of the setting of the Level knob, which controls the volume of the overdriven signal, the clean signal is at unity gain, and the Blend knob allows you to fine-tune the mix balance.

Level
Sets the volume of the overdriven signal.

Drive
Sets the amount of saturation of the overdriven signal.

Attack Switch
Sets the amount of high frequencies when saturated. The ""Boost"" setting emphasizes presence and produces a clearer sound. The ""Flat"" position has no effect on the tone. The ""Cut"" position reduces the amount of high frequencies and produces a warmer sound.

Grunt Switch
Sets the intensity of the low frequencies by selecting from three modes of low-frequency boost levels before the clipping stage.

Bass
Boosts/cuts up to ±12dB around 100Hz.

Lo Mids
Boosts/cuts up to ±12dB around a frequency selected from 250Hz, 500Hz, and 1kHz.

Hi Mids
Boosts/cuts up to ±12dB around a frequency selected from 750Hz, 1.5kHz, or 3kHz.

Treble
Boosts/cuts up to ±12dB around a frequency of 5kHz.

Direct Output
Balanced XLR output, useful when connecting to a microphone preamp or PA system.

Ground lift
Disconnects the ground of the direct out to prevent ground loops. Set the switch to the position that produces less noise. This switch does not affect the 1/4"" phone output.

Cab Sim
Turns cabinet simulation on/off on the direct output. This switch allows you to output a signal that completely bypasses all digital circuitry if desired.

Headphones
Built-in 3.5mm stereo jack headphone amplifier that can be driven with a minimum load of 16 ohms. Level adjustment is done with the master volume control.

USB
Connect to a PC/Mac via the Micro-USB B connector to load cabinet simulation impulse responses (IRs) into the pedal and control various settings.

Aux In
3.5mm stereo input for connecting a PC, smartphone, etc. The signal input to the AUX input is output only to the headphone output. There is an AUX There is no volume control for the signal input to the input, so please control the volume on the connected device. Please be careful of the volume when using.

Although there is a slight feeling of use on the exterior, it is in beautiful condition overall. It works well.

GIB craftsmen will deliver it after strict inspection.

Accessories: Box

Text: Terao Ryuma

Inspector: Ryuzaki
Product photo: Ryuzaki

GIB 3-month warranty

Will be shipped in a sturdy cardboard box.
We also support shipping overseas.

Contact Information

LINE: vwj2699r
email: info@bassick.jp
TEL: 045 594 7308