Infinite is the private brand of High End Music, a repair workshop in Osaka.
The quality of the guitars and basses produced by the knowledge and skills developed in the repair business is highly regarded.
This model is basically based on the motif of a traditional jazz bass.
Nevertheless, it has a unique construction in various areas, such as the BFTS (Buzz Feiton Tuning System) as standard.
The scale is 33.5 in.
Although only 0.5" different than the standard scale, it offers significant advantages in playability without significantly changing the sound.
When you actually hold it, it gives the impression of being smaller than the numbers, as if you were a larger American.
The neck is jointed deep into the body.
This greatly reduces the possibility of possible centre misalignment.
Of course, there is also an acoustic effect due to the larger joint area and the greater proportion of maple in the neck material overall.
The neck joint and the fingerboard-neck bonding are made of interlocking grooves.
The frets are made of JESCAR stainless steel frets.
The characteristic shape is a large rounded fingerboard excluding the fretted area.
This type of finish has recently been adopted by American brands such as Pensa.
The body is made of alder and the neck and fingerboard are made of roasted maple.
Roasted maple is a wood that has undergone a special high-temperature treatment to regulate the oil and moisture content inside the wood.
It was originally valued as a building material for saunas in Finland, and was put to practical use in guitars and basses by Sago in the Kansai region.
Instruments made from this wood seem to have a cushy feel, as if years have passed since they were made.
The pickups are Bare-knuckle and the preamp is Aguilar.
In fact, it has a faster response feel than a traditional style bass in terms of playability.
Yet the sound is deep, fat and sharp.
A good mix of modern styles without losing the traditional JB sound.
Very little fret wear.
The truss rod is in good working order.
Neck is in good condition.
The condition of the body and paintwork is difficult to judge due to the relic, but it can be said to be as good as new with no new scratches since new.
The electrical system is in good condition.
No obvious modifications were found.
Controls : Master volume - push/pull (active/passive), balancer, treble, middle, bass.
Nut width : 39.0 mm
Pitch between strings at bridge : 18.5 mm
Year of manufacture : 2023
Country of manufacture : JAPAN
Accessories : Gig bag
This guitar is delivered to you after it has been adjusted by GIB craftsmen to make it easier to play.
Text : Shunsuke Saga
Inspection : Wakatsuki
Comes with GIB 3-month warranty.
Ships in a sturdy cardboard box.
Also available for international shipping.
Contact Info
LINE : vwj2699r
email : info@bassick.jp
tel : 045 534 7133
The quality of the guitars and basses produced by the knowledge and skills developed in the repair business is highly regarded.
This model is basically based on the motif of a traditional jazz bass.
Nevertheless, it has a unique construction in various areas, such as the BFTS (Buzz Feiton Tuning System) as standard.
The scale is 33.5 in.
Although only 0.5" different than the standard scale, it offers significant advantages in playability without significantly changing the sound.
When you actually hold it, it gives the impression of being smaller than the numbers, as if you were a larger American.
The neck is jointed deep into the body.
This greatly reduces the possibility of possible centre misalignment.
Of course, there is also an acoustic effect due to the larger joint area and the greater proportion of maple in the neck material overall.
The neck joint and the fingerboard-neck bonding are made of interlocking grooves.
The frets are made of JESCAR stainless steel frets.
The characteristic shape is a large rounded fingerboard excluding the fretted area.
This type of finish has recently been adopted by American brands such as Pensa.
The body is made of alder and the neck and fingerboard are made of roasted maple.
Roasted maple is a wood that has undergone a special high-temperature treatment to regulate the oil and moisture content inside the wood.
It was originally valued as a building material for saunas in Finland, and was put to practical use in guitars and basses by Sago in the Kansai region.
Instruments made from this wood seem to have a cushy feel, as if years have passed since they were made.
The pickups are Bare-knuckle and the preamp is Aguilar.
In fact, it has a faster response feel than a traditional style bass in terms of playability.
Yet the sound is deep, fat and sharp.
A good mix of modern styles without losing the traditional JB sound.
Very little fret wear.
The truss rod is in good working order.
Neck is in good condition.
The condition of the body and paintwork is difficult to judge due to the relic, but it can be said to be as good as new with no new scratches since new.
The electrical system is in good condition.
No obvious modifications were found.
Controls : Master volume - push/pull (active/passive), balancer, treble, middle, bass.
Nut width : 39.0 mm
Pitch between strings at bridge : 18.5 mm
Year of manufacture : 2023
Country of manufacture : JAPAN
Accessories : Gig bag
This guitar is delivered to you after it has been adjusted by GIB craftsmen to make it easier to play.
Text : Shunsuke Saga
Inspection : Wakatsuki
Comes with GIB 3-month warranty.
Ships in a sturdy cardboard box.
Also available for international shipping.
Contact Info
LINE : vwj2699r
email : info@bassick.jp
tel : 045 534 7133