【used】Fender Japan / JB75-90US NAT 1999-2002 4.325kg #P045622 Crafted In Japan【GIB Yokohama】

Fender is the undisputed number one brand of electric guitars and basses.
It is loved by countless top artists such as Jaco Pastorius, Marcus Miller, and Geddy Lee.

The Jazz Bass was released with the positioning of a higher-end model of Precision Bass.
Its sharp and clear sound has been loved by many bassists, and even today it enjoys overwhelming support and a shining presence.

This model is a Fender Japan brand jazz bass that was highly regarded but disappeared (integrated into the Fender brand).
As the model number indicates, this reissue model is based on the Fender Jazz Bass of the 1970s and incorporates its features.

The body is made of ash and the fingerboard is made of maple and JB75, as per the model number.
It is a golden combination.

The open and crisp sound is only possible with this spec.
It is beautifully made with high precision. This is something that can only be achieved in Japan.

The remaining frets are about 65%.

The truss rod is a little stiff, but we have confirmed that it works at about 90 degrees.

The neck is in high condition. Currently, the string height on the 12th fret is 2.7mm on the 1st string side and 3.2mm on the 4th string side. All the pegs are dull and the operation is a little stiff.

The body and paintwork are in good condition, with an 8mm ding on the body back. There are numerous scratches that are not easily noticeable, but they are relatively clean. Dullness and rust are scattered on hard parts.

The electrical system is in good condition.
No obvious modifications were found.

Controls : Neck volume, bridge volume, master tone
Nut width : 38.5mm
Pitch between strings at bridge : 19.0mm
Scale : 0.5mm
Year of manufacture : 1999-2002
Country of manufacture : JAPAN
Accessories : None

GIB craftsmen have adjusted this instrument to make it easier to play.

serial number : #P045622 Crafted In Japan
Weight : 4.325kg
Fret: 65% remaining
Truss rod: tight a little, but can work roughly 90° at least
Currently, the string height above the 12th fret is 2.7mm on the 1st string side and 3.2mm on the 4th string side, and it can be played without. All the pegs are dull and the movement is a little stiff.
control: neck volume, bridge volume, master tone
body condition: There is a dent about 8mm on the back of the body. Although there are many scratches that are hard to see, it is relatively clean. However there are many scratches that are hard to see, it is relatively clean. there are some dullness and rust on the hard parts.
electrical：Good.
nut width：38.5mm
string spacing：19.0mm
scale length: 19.0mm
custom：none
accessories：none
year：1999-2002
country of origin： JAPAN

text: Shunsuke Saga

inspection by : wakatsuki

GIB 3-month warranty

Ships in a sturdy cardboard box.
We can also ship to overseas.

Contact Info

LINE : vwj2699r
email : info@bassick.jp
tel : 045 534 7133