【used】Fender / PB62-70US MOD 3TS 1999~2002 4.135kg #P019920 Crafted in Japan【GIB Yokohama】

Fender is the undisputed number one brand of electric guitars and basses.
It is loved by countless top artists such as James Jemerson, Bobby Vega, and Michael League.

The Precision Bass was the world's first solid electric bass with frets, and quickly captivated bassists around the world.
More than half a century after its birth, its brilliance remains unchanged and beloved.

Fender Japan started in the 80's as Fender made in Japan, but unfortunately it has been discontinued and integrated into Fender itself.
However, the brand's quality is still supported by many artists and continues to be sought after today.

This model is the PB62, a faithful reproduction of the '62 PB style.
There were two types of PB62s by grade at the time, but we have determined that this particular model is a higher grade PB62-70US based on the type of bridge and appearance.

If the aforementioned is correct, the body is alder.
The fingerboard is rosewood, a classic configuration.

The PU should be a US pickup.
We hope you understand that this is a difficult part to determine if this is original or not.

MM style humbucking PU is added on the bridge side.
Controls are stacked, 2V2T, and the pot on the bridge side has a center click. (Not meant to be flat in the middle, or anything like that.)

The sound is based on the rich bass tone typical of precision basses, with a lot of beautiful overtones.
The sound of the bridge side is also pleasant, and I think it is a reasonable and beautiful mod.

The remaining frets are approximately 70%.
The truss rod is in good working order.
The neck is in good condition.

The condition of the body and painted surfaces are scattered with small dings and scratches.
There is a large ding near the side of the body where the wood is visible.
The parts are in good condition.

The electrical system is in good condition.

Stamp "7-19" on the neck pocket.

Controls : Neck PU volume/neck PU tone, bridge PU volume (with center click)/neck PU tone (with center click).
Nut width : 42.5mm
Pitch between strings at bridge : 19mm
Year of manufacture : 1999~2002
Country of manufacture : JAPAN
Accessories : Soft case

GIB craftsmen have adjusted this instrument to make it easier to play and deliver it to you.

serial number : #P019920 Crafted in Japan
Weight : 4.135kg
Fret: 70% remaining
Truss rod: good working
neck condition：Good.
control：Neck PU volume/neck PU tone, bridge PU volume (with center click)/neck PU tone (with center click)
There are large dents near the body side. It is a players condition where dullness of parts is also scattered. It is a players condition where dullness of parts is also scattered.
electrical：Good.
nut width：42.5mm
string spacing: 19mm
The control has also been changed to 2 volumes and 2 tones, along with a stack knob. The control has also been changed to 2 volumes and 2 tones, along with a stack knob. orange drop-type condenser.
accessories：Soft case
year：1999~2002
country of origin：Japan

text : Shunsuke Saga

Inspection by : Mizuta

GIB 3-month warranty

Ships in a sturdy cardboard box.
We can also ship to overseas destinations.