Serial 285, popular early model.
Xotic is a brand founded by Japanese builder Hiro Miura in LA.
In Japan, Yoshiteru Takahashi, BJ of indigo jam unit, Katsuji Morioka and many other famous musicians outside Japan, such as Chuck Rainey, Rhonda Smith and Travis Carlton, are using Xotic products.
The XJ series has been highly regarded, especially by studio workers, as a line manufactured in Japan.
The XJ series is basically built in the Fender manner, but with a few modern updates.
The position of the neck joint is slightly different from normal, and when you hold the instrument you will notice that it is easier to get the left hand into the high position.
This is an arrangement for the modern musician who uses the entire fingerboard fully.
This is a very young serial, popular early XJ1T.
It has a classic construction with an alder body and rosewood fingerboard.
We can't be sure as there is no printing, but the features suggest the PU is a Lindy Fralin.
The pre-amp is a Tri Logic.
This is really natural and allows for impedance conversion and flexible sound creation without significantly altering the passive sound.
It has a gain setting that allows you to change the volume between active and passive, or make it louder (or quieter).
No mini-switch on the body top, clean body top.
A push-pull on the volume allows bypassing the pre-amp and switching the PU wiring (series/parallel).
Middle freqency switch and gain setting can be set from the back panel.
The playing feel is smooth and you can feel the high level of playability.
The sound is neatly integrated and can be used in all situations without any worries.
Approx. 70% frets remaining.
The truss rod is in good working order.
Neck is in good condition. The grips have been played and are darkened. The head has a number of minor dents.
The body and paintwork are in good condition, with a scattering of scratches and 1-5 mm dents. There are many scratches, especially near the jack. The pickup height adjustment screws are rusted, but work fine.
No obvious modifications were found.
Controls : Neck volume - push/pull (active/passive), bridge volume - push/pull (series/parallel), master tone, bass, middle, treble.
Nut width : 47.0 mm
Pitch between strings at bridge : 19.0 mm
Year of manufacture: unknown
Country of manufacture : JAPAN
Accessories : Hard case
The D'addario EXL, which is trusted by professional musicians, is used in the setup.
Characterised by a powerful attack and rich overtones, it is truly a performance worthy of being called a standard.
These high-quality strings maximise the performance and character of the instrument, so please enjoy them as well.
The GIB craftsmen have adjusted them to make them easy to play and deliver them to you.
Serial number: #J-285
Weight: 4.57kg
Fret: 70% remaining
Truss rod: good working
Neck condition: good. the grip is played in and dark. there are many small dents on the head.
Controls: Neck Volume -Push/Pull (Active/Passive), Bridge Volume -Push/Pull (Series/Parallel), Master Toon, Base, Middle, Treble.
Body condition: Scratch scratches and about 1 to 5mm dents are scattered. There are many scratches especially near the jack. of the pickup is rusted, but it works without any problems.
Nut width: 47.0 mm
String spacing: 19.0mm
custom: none
accessories: hard case
year: manufacturing date unknown
country of origin: Japan
Text: Shunsuke Saga
Inspection: Wakatsuki
GIB 3-month warranty.
Ships in a sturdy cardboard box.
Also available for international shipping.
Contact Info
LINE : @vwj2699r
email : info@bassick.jp
tel : 045 534 7133
Xotic is a brand founded by Japanese builder Hiro Miura in LA.
In Japan, Yoshiteru Takahashi, BJ of indigo jam unit, Katsuji Morioka and many other famous musicians outside Japan, such as Chuck Rainey, Rhonda Smith and Travis Carlton, are using Xotic products.
The XJ series has been highly regarded, especially by studio workers, as a line manufactured in Japan.
The XJ series is basically built in the Fender manner, but with a few modern updates.
The position of the neck joint is slightly different from normal, and when you hold the instrument you will notice that it is easier to get the left hand into the high position.
This is an arrangement for the modern musician who uses the entire fingerboard fully.
This is a very young serial, popular early XJ1T.
It has a classic construction with an alder body and rosewood fingerboard.
We can't be sure as there is no printing, but the features suggest the PU is a Lindy Fralin.
The pre-amp is a Tri Logic.
This is really natural and allows for impedance conversion and flexible sound creation without significantly altering the passive sound.
It has a gain setting that allows you to change the volume between active and passive, or make it louder (or quieter).
No mini-switch on the body top, clean body top.
A push-pull on the volume allows bypassing the pre-amp and switching the PU wiring (series/parallel).
Middle freqency switch and gain setting can be set from the back panel.
The playing feel is smooth and you can feel the high level of playability.
The sound is neatly integrated and can be used in all situations without any worries.
Approx. 70% frets remaining.
The truss rod is in good working order.
Neck is in good condition. The grips have been played and are darkened. The head has a number of minor dents.
The body and paintwork are in good condition, with a scattering of scratches and 1-5 mm dents. There are many scratches, especially near the jack. The pickup height adjustment screws are rusted, but work fine.
No obvious modifications were found.
Controls : Neck volume - push/pull (active/passive), bridge volume - push/pull (series/parallel), master tone, bass, middle, treble.
Nut width : 47.0 mm
Pitch between strings at bridge : 19.0 mm
Year of manufacture: unknown
Country of manufacture : JAPAN
Accessories : Hard case
The D'addario EXL, which is trusted by professional musicians, is used in the setup.
Characterised by a powerful attack and rich overtones, it is truly a performance worthy of being called a standard.
These high-quality strings maximise the performance and character of the instrument, so please enjoy them as well.
The GIB craftsmen have adjusted them to make them easy to play and deliver them to you.
Serial number: #J-285
Weight: 4.57kg
Fret: 70% remaining
Truss rod: good working
Neck condition: good. the grip is played in and dark. there are many small dents on the head.
Controls: Neck Volume -Push/Pull (Active/Passive), Bridge Volume -Push/Pull (Series/Parallel), Master Toon, Base, Middle, Treble.
Body condition: Scratch scratches and about 1 to 5mm dents are scattered. There are many scratches especially near the jack. of the pickup is rusted, but it works without any problems.
Nut width: 47.0 mm
String spacing: 19.0mm
custom: none
accessories: hard case
year: manufacturing date unknown
country of origin: Japan
Text: Shunsuke Saga
Inspection: Wakatsuki
GIB 3-month warranty.
Ships in a sturdy cardboard box.
Also available for international shipping.
Contact Info
LINE : @vwj2699r
email : info@bassick.jp
tel : 045 534 7133