{"product_id":"used-yamaha-bb435-tbs-2022-4-250kg-iik193513-gib-yokohama-のコピー","title":"【used】Pedulla \/ Rapture FL 5st 4.045kg #RB9818【GIB Yokohama】","description":"Pedulla is an American high-end bass brand established in 1975.\u003cbr\u003eIn particular, their fretless models are highly acclaimed.\u003cbr\u003eMany professionals are loyal users of the brand, and such greats as Mark Egan and Will Lee used the brand.\u003cbr\u003e\u003cbr\u003eThe brand sadly ended in 2019.\u003cbr\u003e\u003cbr\u003eIn Pedulla, the MVP and its fretless version, the Penta Buzz, are well known, but the Rapture is also highly regarded as a great instrument.\u003cbr\u003e\u003cbr\u003eIn fact, there are many inexpensive Rapture models, but this one is a rare Rapture with a high level of seriousness.\u003cbr\u003eMoreover, this is a fretless version, which is the most highly regarded among Pedulla models. It's a very nice guitar.\u003cbr\u003e\u003cbr\u003eThe body appears to be alder back and flame maple top.\u003cbr\u003eThis is a bit unusual, as the entire body is often made of maple.\u003cbr\u003eFingerboard is rose type and coated.\u003cbr\u003e\u003cbr\u003eIt has a little JB-like nuance, including the fact that the PU is JB style.\u003cbr\u003e\u003cbr\u003eTurning to the fingerboard coating, there are some string marks, but it is in very clean condition.\u003cbr\u003ePedulla's fretless coating is very thin, and many of them have cracks, although it is not certain if that is the cause. (We do a lot of repairs on those.)\u003cbr\u003e\u003cbr\u003eI think the great thing about this piece is that it is quite clean here.\u003cbr\u003e\u003cbr\u003eThe PU is a Bartolini 59 series (there are several 59s, but I couldn't identify them). The preamp is a Bartolini NTMB918PG.\u003cbr\u003eThe controls are the usual ones (volume, balancer, treble, bass, etc.), but what I want to mention is the middle switch.\u003cbr\u003e\u003cbr\u003eThe middle toggle switch is probably the one that allows you to switch between the two preset middle EQs at will.\u003cbr\u003eThe amount of boost or cut is set by a semi-fixed resistor in the panel on the back of the body.\u003cbr\u003e\u003cbr\u003eThis function is quite practical and can be used in a variety of ways, such as cutting only when slapping or boosting only when soloing, in addition to normal use.\u003cbr\u003eThe preamp gain setting can be changed freely as well.\u003cbr\u003e\u003cbr\u003eThe sound is more JB-like than Pedulla-like.\u003cbr\u003eIt is a tasteful piece of music that brings out the easy-to-understand deliciousness that is typical of Bartolini.\u003cbr\u003e\u003cbr\u003eI honestly wondered if I would take it home with me. I recommend it.\u003cbr\u003e\u003cbr\u003eThe truss rod action feels a little stiff, but the left-right movement has been confirmed.\u003cbr\u003e\u003cbr\u003eThe neck is a little high, but the string height at the 12th fret is 2.5mm on the 1st string side and 3.3mm on the 5th string side, and it is playable without any chattering.\u003cbr\u003e\u003cbr\u003eThe condition of the body and paint surface has a few hardly noticeable scratches and a few dents of a few mm.\u003cbr\u003eIt can be said to be relatively clean and beautiful.\u003cbr\u003e\u003cbr\u003eThe electrical system is in good condition.\u003cbr\u003eNo obvious modifications were found.\u003cbr\u003e\u003cbr\u003eControls : Master volume, balancer, treble, bass, middle switch SW\u003cbr\u003eNut width : 49.0mm\u003cbr\u003ePitch between strings at bridge : 17.0mm\u003cbr\u003eYear of manufacture : unknown\u003cbr\u003eCountry of manufacture : USA\u003cbr\u003eAccessories : HISCOX hard case\u003cbr\u003e\u003cbr\u003eThe D'addario EXL, trusted by professional musicians, is used in the setup.\u003cbr\u003eIt is characterized by a powerful attack and rich overtones, and its performance is truly worthy of being called a standard.\u003cbr\u003ePlease enjoy these high-quality strings that bring out the performance and character of the instrument to the fullest, so please enjoy them as well.\u003cbr\u003e\u003cbr\u003eGIB's craftsmen will adjust it to make it easier to play and deliver it to you.\u003cbr\u003e\u003cbr\u003eserial number: #RB9818\u003cbr\u003eWeight: 4.045kg\u003cbr\u003eFret: % remaining\u003cbr\u003eTruss rod: tight a little, but can work roughly 90° at least\u003cbr\u003eAt present, the string height on the 12th fret is 2.5 mm on the first string side, 3.3 mm on the 5th string side, and can be At present the string height on the 12th fret is 2.5 mm on the first string side, 3.3 mm on the 5th string side, and can be sound clogging or stiffness.\u003cbr\u003eControls: master volume, balancer, treble, bass\u003cbr\u003eBody condition: There are several noticeable scratches and several mm dents.\u003cbr\u003eelectrical：Good.\u003cbr\u003enut width：49.0mm\u003cbr\u003estring spacing：17.0mm\u003cbr\u003ecustom：none\u003cbr\u003eaccessories：HISCOX hard case\u003cbr\u003eyear：manufacturing date unknown\u003cbr\u003ecountry of origin：USA\u003cbr\u003e\u003cbr\u003etext : Shunsuke Saga\u003cbr\u003e\u003cbr\u003eInspection by : WAKATSUKI\u003cbr\u003e\u003cbr\u003eGIB 3-month warranty included\u003cbr\u003e\u003cbr\u003eWe ship in a sturdy cardboard box.\u003cbr\u003eWe can also ship to overseas destinations.","brand":"Pedulla","offers":[{"title":"Default Title","offer_id":41131842928749,"sku":"179914271","price":2716.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/5625\/1510\/files\/Pe5277-1_1.jpg?v=1709981807","url":"https:\/\/bassshop-gib.com\/zh-hans\/products\/used-yamaha-bb435-tbs-2022-4-250kg-iik193513-gib-yokohama-%e3%81%ae%e3%82%b3%e3%83%94%e3%83%bc","provider":"Bass Shop Geek IN Box","version":"1.0","type":"link"}