{"product_id":"used-fender-japan-pb62-vwh-1990-3-975kg-j014346-made-in-japan-gib-yokohama","title":"【used】Fender Japan \/ PB62 VWH 1990 3.975kg #J014346 MADE IN JAPAN【GIB Yokohama】","description":"\u003cp\u003eFender is the undisputed number one brand of electric guitars and basses.\u003cbr\u003eIt is loved by countless top artists such as James Jemerson, Bobby Vega, and Michael League.\u003c\/p\u003e\n\u003cp\u003eThe Precision Bass was the world's first solid electric bass with frets, and quickly captivated bassists around the world.\u003cbr\u003eMore than half a century after its birth, its brilliance remains unchanged and beloved.\u003c\/p\u003e\n\u003cp\u003eFender Japan started in the 80's as Fender made in Japan, but unfortunately it has been discontinued and integrated into Fender itself.\u003cbr\u003eHowever, the brand's quality is still supported by many artists and continues to be sought after today.\u003c\/p\u003e\n\u003cp\u003eThis model is a PB62, a faithful reproduction of the '62 PB style.\u003cbr\u003eThe back of the neck is stamped PBD-62.\u003c\/p\u003e\n\u003cp\u003eThere is a large dish-cut mark in the lower hole for the neck set screw on the body, which is unfamiliar.\u003cbr\u003eThe paint is also on the countersunk part, which suggests that the countersunk cutting was done at the time of manufacture, rather than afterwards.\u003c\/p\u003e\n\u003cp\u003eThere is a repair to the lower hole in the pickguard.\u003cbr\u003eFrom this point, it is possible that the pickguard is not original, or that the lower hole was adjusted to fit a shrunken pickguard.\u003c\/p\u003e\n\u003cp\u003eThe neck end is stamped 12.13.90.\u003c\/p\u003e\n\u003cp\u003eBy comparing this guitar with the catalogs of the time, it seems to be a PB62-500 based on the bridge specifications.\u003c\/p\u003e\n\u003cp\u003eIt is very lightweight and has an attractive, generous sound typical of PBs.\u003c\/p\u003e\n\u003cp\u003eThe remaining frets are approximately 70%.\u003cbr\u003eThe truss rod is in good working order.\u003c\/p\u003e\n\u003cp\u003eThe neck is in good condition, but the string height at the 12th fret is 2.5mm on the 1st string side and 3.0mm on the 4th string side, and it is playable without any chattering.\u003c\/p\u003e\n\u003cp\u003eThere are several dents on the head and grip.\u003cbr\u003eThere are two sticker marks on the back of the head.\u003cbr\u003eThe peg button on the first string is distorted, but it works well.\u003c\/p\u003e\n\u003cp\u003eThe condition of the body and paint surface has some dents throughout.\u003cbr\u003eThere is one crack in the paint near the neck pocket.\u003cbr\u003eThere is a yellowing area due to tanning.\u003c\/p\u003e\n\u003cp\u003eHardware parts are dull and chrome is peeling.\u003c\/p\u003e\n\u003cp\u003eThe electrical system is in good condition.\u003c\/p\u003e\n\u003cp\u003eThe finger rest has been retrofitted using one of the holes under the existing pickguard screws.\u003c\/p\u003e\n\u003cp\u003eControls : volume, tone\u003cbr\u003eNut width : 42.0mm\u003cbr\u003ePitch between strings at bridge : 20.0mm\u003cbr\u003eScale : 34inch\u003cbr\u003eYear of manufacture : 1990\u003cbr\u003eCountry of manufacture : JAPAN\u003cbr\u003eAccessories : None\u003c\/p\u003e\n\u003cp\u003eStringjoy, imported and sold by our store, is used in the setup.\u003cbr\u003eMade in Nashville, Stringjoy has a silky feel with plenty of low end and rich, natural overtones.\u003cbr\u003eThese are quality strings that bring out the best performance and character of the instrument, so please enjoy them as well.\u003c\/p\u003e\n\u003cp\u003eGIB's craftsmen will adjust the strings to make them easy to play and deliver them to you.\u003c\/p\u003e\n\u003cp\u003eserial number: #J014346 MADE IN JAPAN\u003cbr\u003eWeight: 3.975kg\u003cbr\u003eFret: 70% remaining\u003cbr\u003eTruss rod: good working\u003cbr\u003eCurrently, the string height above the 12th fret is 2.5mm on the 1st string side and 3.0mm on the 4th string side, and it can be played without clogging or buzzing. There are a few dents on the head and grip. There are two sticker marks on the back of the head. The peg button on the 1st string has some distortion, but it works well.\u003cbr\u003eControl: volume, tone\u003cbr\u003eThere is one crack in the paint near the neck pocket. There are some areas that are tanned and yellowed. There are some areas that are tanned and yellowed. There are some dullness and peeling of plating on the hard parts. There is evidence that the pilot holes for the pickguard mounting screws were repaired in several places.\u003cbr\u003eElectrical: Good.\u003cbr\u003enut width：42.0mm\u003cbr\u003estring spacing：20.0mm\u003cbr\u003escale length：34Inch\u003cbr\u003ecustom：A finger rest is retrofitted using one pilot hole of the existing pickguard screw.\u003cbr\u003eaccessories：none\u003cbr\u003eyear：1990\u003cbr\u003ecountry of origin： JAPAN\u003c\/p\u003e\n\u003cp\u003etext: Shunsuke Saga\u003c\/p\u003e\n\u003cp\u003eInspection by : WAKATSUKI\u003c\/p\u003e\n\u003cp\u003eGIB 3 months warranty\u003c\/p\u003e\n\u003cp\u003eShips in a sturdy cardboard box.\u003cbr\u003eWe can also ship to overseas.\u003cbr\u003e\u003cbr\u003eContact Info\u003c\/p\u003e\n\u003cp\u003eLINE : vwj2699r\u003cbr\u003eemail : info@bassick.jp\u003cbr\u003etel : 045 534 7133\u003c\/p\u003e","brand":"Fender Japan","offers":[{"title":"Default Title","offer_id":41454659993709,"sku":null,"price":849.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/5625\/1510\/files\/Fe5849-1_1.jpg?v=1714712280","url":"https:\/\/bassshop-gib.com\/zh-hans\/products\/used-fender-japan-pb62-vwh-1990-3-975kg-j014346-made-in-japan-gib-yokohama","provider":"Bass Shop Geek IN Box","version":"1.0","type":"link"}