Just as Fender developed Fender Japan, Gibson developed Orville in the 80s and 90s.
The Les Paul model released by Gibson in 1952 was the company's first solid guitar and the signature model of an American guitarist named Les Paul.
The fat tone and long sustain of the Les Paul model have been loved by countless artists and have graced the music scene in a variety of genres since its introduction.
It is truly a representative model of the electric guitar.
This model is LPS-75 made in 1994.
The body back is made of mahogany and the top is made of maple.
It has a plain top for a relaxed look that is not too flashy.
The neck is mahogany and the fingerboard is rosewood, a traditional combination.
In addition to the above, many upgrades have been made.
First, the pickups have been replaced with Gibson 57 Classic on the front and 57 Classic Plus on the rear.
These are Gibson's long-selling models that have been loved for many years as replicas of the humbucking pickups developed by Seth Lover, known as PAF.
The pots have been replaced with CTS and the condenser with Bumble Bee style.
The specs are very close to those of the original Gibson.
This is a true evolution of the Orville, which still has many fans today.
How about this opportunity?
The remaining frets are approximately 80%.
The truss rod is a little stiff, but we have confirmed that it works at about 90 degrees.
The neck is in good condition.
The body and painted surface are in good condition, with some scratches and dents.
Metal parts are tarnished.
Front pickup Gibson 57'Classic, Rear pickup replaced with 57'Classic₊.
Pot replaced with CTS and condenser replaced with Bumble Bee type.
Strap pins and knobs have been replaced.
Nut width : 42.5mm
Pitch between strings at bridge : 10mm
Guitar shop TONIQ's craftsmen have adjusted it to be easy to play.
serial number : #406430
Weight : 4.27kg
Fret: 80% remaining
Truss rod: tight a little, but can work roughly 90° at least
neck condition: Good
control: 2 volumes, 2 tones
Dullness can be seen in metal parts. There is a 5mm dent on the body back.
nut width：42.5mm
string spacing: 10mm
custom：Change to front PU Gibson57Classic, rear PU57CLASSIC₊, replace the pot with switchcraft, exchange condenser, replace strap pin, hat knob
year：1994
The Les Paul model released by Gibson in 1952 was the company's first solid guitar and the signature model of an American guitarist named Les Paul.
The fat tone and long sustain of the Les Paul model have been loved by countless artists and have graced the music scene in a variety of genres since its introduction.
It is truly a representative model of the electric guitar.
This model is LPS-75 made in 1994.
The body back is made of mahogany and the top is made of maple.
It has a plain top for a relaxed look that is not too flashy.
The neck is mahogany and the fingerboard is rosewood, a traditional combination.
In addition to the above, many upgrades have been made.
First, the pickups have been replaced with Gibson 57 Classic on the front and 57 Classic Plus on the rear.
These are Gibson's long-selling models that have been loved for many years as replicas of the humbucking pickups developed by Seth Lover, known as PAF.
The pots have been replaced with CTS and the condenser with Bumble Bee style.
The specs are very close to those of the original Gibson.
This is a true evolution of the Orville, which still has many fans today.
How about this opportunity?
The remaining frets are approximately 80%.
The truss rod is a little stiff, but we have confirmed that it works at about 90 degrees.
The neck is in good condition.
The body and painted surface are in good condition, with some scratches and dents.
Metal parts are tarnished.
Front pickup Gibson 57'Classic, Rear pickup replaced with 57'Classic₊.
Pot replaced with CTS and condenser replaced with Bumble Bee type.
Strap pins and knobs have been replaced.
Nut width : 42.5mm
Pitch between strings at bridge : 10mm
Guitar shop TONIQ's craftsmen have adjusted it to be easy to play.
serial number : #406430
Weight : 4.27kg
Fret: 80% remaining
Truss rod: tight a little, but can work roughly 90° at least
neck condition: Good
control: 2 volumes, 2 tones
Dullness can be seen in metal parts. There is a 5mm dent on the body back.
nut width：42.5mm
string spacing: 10mm
custom：Change to front PU Gibson57Classic, rear PU57CLASSIC₊, replace the pot with switchcraft, exchange condenser, replace strap pin, hat knob
year：1994