Fender is the undisputed number one brand of electric guitars and basses.
It is loved by countless top artists such as Jaco Pastorius, Marcus Miller, and Geddy Lee.
The Jazz Bass was released with the positioning of a higher-end model of Precision Bass.
Its sharp and clear sound has been loved by many bassists, and even today it enjoys overwhelming support and a shining presence.
This model is a new Fender that has been reconfigured after the discontinuation of Fender Japan.
It is manufactured in Japan, but with more American specifications and input than before.
This model, which recreates the specifications of the 1970s, is favored by many artists for its high quality.
The body is a golden combination of ash and maple fretboard.
The sound is open and crisp.
These characteristics are unique to this spec.
The high playability is due to the beautifully crafted design.
This is something that can only be achieved in Japan.
The remaining frets are approximately 80%.
The truss rod is in good condition and the neck is in good condition.
There is a 15mm ding on the tip of the head.
Both ends of the nut are chipped, but it does not fall off at present and can be used without any problem.
The condition of the body and paint surface has many small dents and scratches. There are two paint cracks near the neck pocket. Overall, it is in a relatively clean category.
The electrical system is in good condition.
No obvious modifications were found.
Controls : Neck volume, bridge volume, master tone - push/pull (parallel/series)
Nut width : 38.0mm
Pitch between strings at bridge : 19.0mm
Year of manufacture : 2016
Country of manufacture : JAPAN
Accessories : gig bag (handle is damaged)
The D'addario EXL, trusted by professional musicians, is used in the setup.
Characterized by a powerful attack and rich overtones, this performance is truly worthy of being called a standard.
Please enjoy these high-quality strings that bring out the performance and character of the instrument to the fullest, so please enjoy them as well.
GIB craftsmen will adjust them to make them easy to play and deliver them to you.
serial number: #JD16004986 MADE IN JAPAN
Weight: 4.650kg
Fret: 80% remaining
Truss rod: good working
There are about 15 mm dents at the tip of the head. Although both ends of the nut are missing, it can be used without any problem without falling down. However both ends of the nut are missing, it can be used without any problem without falling down.
control: neck volume, bridge volume, master tone -push/pull (parallel/series)
Overall, it is in a relatively beautiful category. Overall, it is in a relatively beautiful category.
electrical：Good.
nut width：38.0mm
string spacing：19.0mm
custom：none
accessories：Gig bag (NOAH'S ARK [)
year：2016
country of origin：Japan
text: Shunsuke Saga
inspection by : wakatsuki
GIB 3 months warranty
Ships in a sturdy cardboard box.
We can also ship to overseas destinations.
It is loved by countless top artists such as Jaco Pastorius, Marcus Miller, and Geddy Lee.
The Jazz Bass was released with the positioning of a higher-end model of Precision Bass.
Its sharp and clear sound has been loved by many bassists, and even today it enjoys overwhelming support and a shining presence.
This model is a new Fender that has been reconfigured after the discontinuation of Fender Japan.
It is manufactured in Japan, but with more American specifications and input than before.
This model, which recreates the specifications of the 1970s, is favored by many artists for its high quality.
The body is a golden combination of ash and maple fretboard.
The sound is open and crisp.
These characteristics are unique to this spec.
The high playability is due to the beautifully crafted design.
This is something that can only be achieved in Japan.
The remaining frets are approximately 80%.
The truss rod is in good condition and the neck is in good condition.
There is a 15mm ding on the tip of the head.
Both ends of the nut are chipped, but it does not fall off at present and can be used without any problem.
The condition of the body and paint surface has many small dents and scratches. There are two paint cracks near the neck pocket. Overall, it is in a relatively clean category.
The electrical system is in good condition.
No obvious modifications were found.
Controls : Neck volume, bridge volume, master tone - push/pull (parallel/series)
Nut width : 38.0mm
Pitch between strings at bridge : 19.0mm
Year of manufacture : 2016
Country of manufacture : JAPAN
Accessories : gig bag (handle is damaged)
The D'addario EXL, trusted by professional musicians, is used in the setup.
Characterized by a powerful attack and rich overtones, this performance is truly worthy of being called a standard.
Please enjoy these high-quality strings that bring out the performance and character of the instrument to the fullest, so please enjoy them as well.
GIB craftsmen will adjust them to make them easy to play and deliver them to you.
serial number: #JD16004986 MADE IN JAPAN
Weight: 4.650kg
Fret: 80% remaining
Truss rod: good working
There are about 15 mm dents at the tip of the head. Although both ends of the nut are missing, it can be used without any problem without falling down. However both ends of the nut are missing, it can be used without any problem without falling down.
control: neck volume, bridge volume, master tone -push/pull (parallel/series)
Overall, it is in a relatively beautiful category. Overall, it is in a relatively beautiful category.
electrical：Good.
nut width：38.0mm
string spacing：19.0mm
custom：none
accessories：Gig bag (NOAH'S ARK [)
year：2016
country of origin：Japan
text: Shunsuke Saga
inspection by : wakatsuki
GIB 3 months warranty
Ships in a sturdy cardboard box.
We can also ship to overseas destinations.