Gibson is the king of the guitar world, having produced many famous instruments.
The Flying V, released by Gibson in 1958, is a model of an aggressive and unique guitar design.
The Flying V, released by Gibson in 1958, is a representative model of the deformed guitar with an aggressive and unique design.
This model is based on the 1967 Flying V. The body and neck are made of Mahogany.
The body and neck are made of Mahogany, and the fingerboard is made of Rosewood.
It is a traditional combination typical of Gibson.
In addition to the above, this model has been further modified in numerous ways.
The neck pickup has been replaced with a Seymour Duncan SH-1n.
This model reproduces the sound of the legendary P.A.F. pickup.
Other.
All pots have been replaced with CTS 500kΩ A-curves.
Jacks have been replaced with Pure Tone Jacks.
Switch to Switchcraft toggle switches.
The capacitor was replaced with a Scud CR-022VQ.
Replaced wiring materials
T.O.M. and stop tailpiece were replaced with those made by Freedom.
You can feel the previous owner's dedication.
This is one that will definitely stand out on stage.
How about this opportunity?
The remaining frets are approximately 70%.
The truss rod is in good working order.
The neck is in good condition. It is currently adjusted at 2.0mm on the 6th string side to 1.5mm on the 1st string side on the 12th fret.
The body and painted surface have scratches, dents, and other signs of use. There is rust on metal parts.
Pot, jack, selector, wiring, neck pickup (Duncan SH-1), condenser, bridge, and tailpiece have been replaced.
There is a little chatter on the 2nd fret of the 1st string.
Controls : 2 volume, 1 tone, toggle switch
Nut width : 43mm
Pitch between strings at bridge : 10.5mm
Guitar shop TONIQ craftsmen have adjusted this guitar to make it easier to play.
serial number : #91356726
Weight : 3.3kg
Fret: 70% remaining
Truss rod: good working
Currently, it is adjusted from 2.0mm on the 6th string side to 1.5mm on the 1st fret. Currently, it is adjusted from 2.0mm on the 6th string side to 1.5mm on the 1st string side on the 12th fret.
Control: 2 volumes, 1 tone, toggle switch
body condition：There are signs of use such as scratches and dents overall. There is rust on the metal parts.
nut width：43mm
string spacing：10.5mm
custom: Pot, jack, selector, wiring, neck pickup (SH-1), capacitor, bridge, tailpiece replacement
year：1996
accessories：soft case, arm
country of origin：America
accessories：original hard case, original bridge
text : Teppei Ozawa
Inspection : Ozawa
TONIQ 3-month warranty included
Ships in a sturdy cardboard box.
We can also ship to overseas destinations.
Contact Info
TEL 045-548-6661
email : ozawa@bassick.jp