Fender is the undisputed number one brand of electric guitars and basses.
It is loved by countless top artists such as James Jemerson, Bobby Vega, and Michael League.
The Precision Bass was the world's first solid electric bass with frets, and quickly captivated bassists around the world.
More than half a century after its birth, its brilliance remains unchanged and beloved.
Fender Japan started in the 80's as Fender made in Japan, but unfortunately it has been discontinued and integrated into Fender itself.
However, the brand's quality is still supported by many artists and continues to be sought after today.
This model is a PB62, a faithful reproduction of the '62 PB style.
The back of the neck is stamped PBD-62.
There is a large dish-cut mark in the lower hole for the neck set screw on the body, which is unfamiliar.
The paint is also on the countersunk part, which suggests that the countersunk cutting was done at the time of manufacture, rather than afterwards.
There is a repair to the lower hole in the pickguard.
From this point, it is possible that the pickguard is not original, or that the lower hole was adjusted to fit a shrunken pickguard.
The neck end is stamped 12.13.90.
By comparing this guitar with the catalogs of the time, it seems to be a PB62-500 based on the bridge specifications.
It is very lightweight and has an attractive, generous sound typical of PBs.
The remaining frets are approximately 70%.
The truss rod is in good working order.
The neck is in good condition, but the string height at the 12th fret is 2.5mm on the 1st string side and 3.0mm on the 4th string side, and it is playable without any chattering.
There are several dents on the head and grip.
There are two sticker marks on the back of the head.
The peg button on the first string is distorted, but it works well.
The condition of the body and paint surface has some dents throughout.
There is one crack in the paint near the neck pocket.
There is a yellowing area due to tanning.
Hardware parts are dull and chrome is peeling.
The electrical system is in good condition.
The finger rest has been retrofitted using one of the holes under the existing pickguard screws.
Controls : volume, tone
Nut width : 42.0mm
Pitch between strings at bridge : 20.0mm
Scale : 34inch
Year of manufacture : 1990
Country of manufacture : JAPAN
Accessories : None
Stringjoy, imported and sold by our store, is used in the setup.
Made in Nashville, Stringjoy has a silky feel with plenty of low end and rich, natural overtones.
These are quality strings that bring out the best performance and character of the instrument, so please enjoy them as well.
GIB's craftsmen will adjust the strings to make them easy to play and deliver them to you.
serial number: #J014346 MADE IN JAPAN
Weight: 3.975kg
Fret: 70% remaining
Truss rod: good working
Currently, the string height above the 12th fret is 2.5mm on the 1st string side and 3.0mm on the 4th string side, and it can be played without clogging or buzzing. There are a few dents on the head and grip. There are two sticker marks on the back of the head. The peg button on the 1st string has some distortion, but it works well.
Control: volume, tone
There is one crack in the paint near the neck pocket. There are some areas that are tanned and yellowed. There are some areas that are tanned and yellowed. There are some dullness and peeling of plating on the hard parts. There is evidence that the pilot holes for the pickguard mounting screws were repaired in several places.
Electrical: Good.
nut width：42.0mm
string spacing：20.0mm
scale length：34Inch
custom：A finger rest is retrofitted using one pilot hole of the existing pickguard screw.
accessories：none
year：1990
country of origin： JAPAN
text: Shunsuke Saga
Inspection by : WAKATSUKI
GIB 3 months warranty
Ships in a sturdy cardboard box.
We can also ship to overseas.
Contact Info
LINE : vwj2699r
email : info@bassick.jp
tel : 045 534 7133