Sago is a handmade guitar brand located in Hyogo, Japan, that specializes in full-order production, fulfilling all requests from customers.
The regular models (though most of them are one-offs) that they make by utilizing the knowledge and skills they have cultivated over the years in this way are also highly appreciated.
The brand is also trusted by musicians.
Tabuchi of Unison Square Garden, RIO of Mary's Blood, and Kusakari of Sakanaction are among the Sago artists.
This model Ove been supported by many artists as an original model.
It is also a special one made for the 2023 NAMM SHOW.
Of special note is the wrap paint look that is synonymous with Sago.
The wrap paint, which is created by layering and scraping several different colors, is very unique.
Even the PU cover and pickguard are painted in the same way.
As you can see, it is very flashy.
The body is made of alder, which is very familiar in this respect.
The neck is the original carbon neck.
It is hollow construction, finished in the same way as wood in weight, and has a stronger resonance than the solid type.
The sound and playing feel are a little different from what you might imagine from the image of a carbon neck.
It has a pleasant texture that makes the strings bounce up and down.
The frets are stainless steel.
Pickups are split coil.
The use of a large pole piece is also a unique feature.
The sound is relatively fat and taut.
However, the treble is not lost and is neatly balanced from bottom to top.
The great thing is that there is little noise in the neck or bridge position as well as in the mix.
The preamp is the original 2-band type.
By doing the pickups, preamp, and woodworking all within the same manufacturer, I think the model is well-focused.
There is no ambiguity, and you can clearly sense the direction they are aiming for as a manufacturer, and this is a feature not found in component brands.
This is a clear concept and a work that strongly demonstrates the brand's attitude. Lovely.
Almost no fret wear.
The truss rod is in good working order.
The neck is in good condition.
The condition of the body and painted surface is very clean and like new.
The electrical system is in good condition.
No obvious modifications were found.
Controls : Master volume - push/pull (active/passive), treble, bass
Nut width : 38.0mm
Pitch between strings at bridge : 19.0mm
Year of manufacture : 2023
Country of manufacture : JAPAN
Accessories : Original gig bag, spec sheet
D'addario EXL, trusted by professional musicians, is used in the setup.
It is characterized by a powerful attack and rich overtones, and its performance is truly worthy of being called a standard.
Please enjoy these high-quality strings that bring out the performance and character of the instrument to the fullest, so please enjoy them as well.
GIB craftsmen will adjust them to make them easy to play and deliver them to you.
serial number：#CR23040501
Weight：3.605kg
Fret：100% remaining
Truss rod：good working
neck condition：It's good.
control：Master Volume - Push/Pull (Active/Passive), Treble, Bass
body condition：It's very clean and looks like new.
electrical：It's good.
nut width：38.0mm
string spacing：19.0mm
custom：none
accessories：Original gig bag, spec sheet
year：2023
country of origin：JAPAN
text: Shunsuke Saga
Inspection by : Wakatsuki
GIB 3 months warranty
Ships in a sturdy cardboard box.
We can also ship to overseas.
Contact Info
LINE : vwj2699r
email : info@bassick.jp
TEL : 045 534 7133
The regular models (though most of them are one-offs) that they make by utilizing the knowledge and skills they have cultivated over the years in this way are also highly appreciated.
The brand is also trusted by musicians.
Tabuchi of Unison Square Garden, RIO of Mary's Blood, and Kusakari of Sakanaction are among the Sago artists.
This model Ove been supported by many artists as an original model.
It is also a special one made for the 2023 NAMM SHOW.
Of special note is the wrap paint look that is synonymous with Sago.
The wrap paint, which is created by layering and scraping several different colors, is very unique.
Even the PU cover and pickguard are painted in the same way.
As you can see, it is very flashy.
The body is made of alder, which is very familiar in this respect.
The neck is the original carbon neck.
It is hollow construction, finished in the same way as wood in weight, and has a stronger resonance than the solid type.
The sound and playing feel are a little different from what you might imagine from the image of a carbon neck.
It has a pleasant texture that makes the strings bounce up and down.
The frets are stainless steel.
Pickups are split coil.
The use of a large pole piece is also a unique feature.
The sound is relatively fat and taut.
However, the treble is not lost and is neatly balanced from bottom to top.
The great thing is that there is little noise in the neck or bridge position as well as in the mix.
The preamp is the original 2-band type.
By doing the pickups, preamp, and woodworking all within the same manufacturer, I think the model is well-focused.
There is no ambiguity, and you can clearly sense the direction they are aiming for as a manufacturer, and this is a feature not found in component brands.
This is a clear concept and a work that strongly demonstrates the brand's attitude. Lovely.
Almost no fret wear.
The truss rod is in good working order.
The neck is in good condition.
The condition of the body and painted surface is very clean and like new.
The electrical system is in good condition.
No obvious modifications were found.
Controls : Master volume - push/pull (active/passive), treble, bass
Nut width : 38.0mm
Pitch between strings at bridge : 19.0mm
Year of manufacture : 2023
Country of manufacture : JAPAN
Accessories : Original gig bag, spec sheet
D'addario EXL, trusted by professional musicians, is used in the setup.
It is characterized by a powerful attack and rich overtones, and its performance is truly worthy of being called a standard.
Please enjoy these high-quality strings that bring out the performance and character of the instrument to the fullest, so please enjoy them as well.
GIB craftsmen will adjust them to make them easy to play and deliver them to you.
serial number：#CR23040501
Weight：3.605kg
Fret：100% remaining
Truss rod：good working
neck condition：It's good.
control：Master Volume - Push/Pull (Active/Passive), Treble, Bass
body condition：It's very clean and looks like new.
electrical：It's good.
nut width：38.0mm
string spacing：19.0mm
custom：none
accessories：Original gig bag, spec sheet
year：2023
country of origin：JAPAN
text: Shunsuke Saga
Inspection by : Wakatsuki
GIB 3 months warranty
Ships in a sturdy cardboard box.
We can also ship to overseas.
Contact Info
LINE : vwj2699r
email : info@bassick.jp
TEL : 045 534 7133