G&L has several series according to the manufacturing method and price range, and this is the Tribute series manufactured in Indonesia.
This model is manufactured in Indonesia to keep down the cost, but at the same time, it uses the same hardware, such as pickups, as the original USA model, and has authentic specifications.
This is the flagship model ASAT Classic.
This is the final model of the Telecaster series, the last model created by Leo Fender, the creator of the Telecaster.
The body is made of standard ash.
The body is made of standard ash and finished in a see-through natural finish to bring out the grain of the ash wood, giving it a beautiful look.
The neck and fingerboard are made of maple.
The fretboard radius is slightly flatter than that of traditional spec Fender guitars, which makes the guitar stress-free and easy to play.
The pickups are equipped with MFD (Magnetic Field Design) pickups, which can be said to be G&L's greatest feature, as in the USA.
By placing a ceramic magnet under the coil to increase the output and reducing the number of coil turns, G&L has succeeded in eliminating the lack of power and noise that was once considered a weak point of single coil pickups.
Furthermore, the height of the pole piece can be adjusted on this pickup.
This is a rare feature for single coil pickups, and is a great feature for guitarists who want to precisely adjust the volume balance for each string.
The bridge uses a 6-way saddle bridge.
Conventional Telecasters have two strings on one saddle, making it impossible to perform accurate octave tuning, but this bridge allows precise tuning for each string.
In terms of sound, the ASAT is characterized by a sound that is both warm and crisp.
It has the impression of a thicker, clearer version of the traditional Telecaster sound, and fits both clean tones and hard drive sounds well.
We recommend this gem to those who are looking for a modern Telecaster sound that matches today's music.
How about this opportunity?
The remaining frets are approximately 70%.
The truss rod is in good working condition.
The neck is in good condition, with a slight high up, but can be played with no problem at a string height of 2.0mm to 2.5mm.
The condition of the body and painted surface shows a number of play scratches on the body and pickguard area when exposed to light.
Scratches on metal parts and rust that cannot be removed by cleaning are scattered.
There is a crack in the paint at the neck joint.
There is a small chip on the 22nd fret of the 2nd string.
There is a 7mm dent on the head.
There is a faint trace of sticker burn on the back of the body.
Please check the pictures carefully.
Nut width : 41mm
Pitch between strings at bridge : 10.5mm
Guitar shop TONIQ craftsmen have adjusted this guitar to make it easier to play.
serial number：#091119862
Weight：3.82kg
Fret：70% remaining
Truss rod：good working
neck condition：You can see a little high. The string height is 2.0mm to 2.5mm and you can play without any problems.
control：1 volume, 1 tone, 3WAY selector
body condition：When you hit the light, you can see many scratches on the body and pickguards. Rust that does not fall due to scratches or cleaning is scattered in metal parts. There is a paint crack in the neck joint. There is a small chip on the 2nd 22th fret. There is a dent of about 7mm in the head. There is a slight seal mark on the body back.
nut width：41mm
string spacing：10.5mm
year：不明
accessories：none
country of origin：Indonesia
付属品：なし
文章：小澤鉄平
検品担当 : 小澤
TONIQ 3か月保証付き
頑丈な段ボール箱で発送します。
海外向けの発送にも対応します。
item will be packed with a hard cardboard box.
we do ship internationally.
問い合わせ先
Contact Info
email : ozawa@bassick.jp
TEL : 045 548 6661